Have a dandy here....
I have added two nodes to a VH cluster.. all is well with clustering etc.. I then attempt to add the Virtualization Host role.. which states the machine must be restarted..
I agree.. the machine indicates it is installing features as it shuts down.. then on reboot it indicates preparing to configure windows, then it says its configuring windows features. Then it state its notifying services that windows is shutting down and restarts again.
On the next startup again it says preparing to configure windows do not turn off your computer, then it says its configuring windows updates, it counts up with a percentage .. then finally says "Failure configuring Windows Updates Reverting Changes do not turn off your computer"
Once again it reboots.. and Voila !!!! No Role is installed and I'm back to square one.. Lovely ya ?
Any ideas?
I have run DISM to check for update corruption, I have searched the logs the only item I find is that a WER report was created I look in the WER folder items and see nothing that is obvious. What is interesting is that this happens with BOTH new servers not just one.. they were built from scratch and not using any bare metal installation.
Below is the WER in event log:
Fault bucket , type 0
Event Name: WindowsWcpOtherFailure3
Response: Not available
Cab Id: 0
Problem signature:
P1: 6.2.9200
P2: componentstore\com\advancedinstallers.cpp
P3: LoadHandlerDll
P4: 177
P5: 8007007e
P6: 0x39c6e321
P7:
P8:
P9:
P10:
Attached files:
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\Critical_6.2.9200_567334a349b518f8bb4abacbfc8d448c2be7e84_14ace12a
Analysis symbol:
Rechecking for solution: 0
Report Id: f01d635c-ddfa-11e2-9416-f192566e9382
Report Status: 4
Hashed bucket: