Hi, I've this issue after migration of RDS server from 2012 R2 to 2016 and client have Windows 10 1709 but with Windows 10 1703 no issue.
Any suggestions?
↧
W10 1709 RemoteApp - Pop-ups hidden behind main window
↧
Windows Server 2008 Date format change in RDP Users
Dear sir
Recently i have formatted my server and re-instaled windows server 2008 enterprise edition. Our clients are accessing this server thorugh remote desktop connection and they will be able to logon to application and if they close the application they will be logged out from the server. They are not allow to see or to do any other activity on the server and server desktop.
My problem is the clients are getting the date format dd/mm/yyyy but they wanted to have dd-mm-yyyy. I have done configuration changes on the regional setup (administrative tab).
Before changing the above setup there are users already created. For those users the date format is showing dd/mm/yyyy but if i remove that users or add new users i am getting the new format as dd-mm-yyyy.
Is any way i can change the date format to all the users without deleting the user account.
Your help will be very helpful.
Thanks
Srini-Mumbai
Srini
↧
↧
Unable to install RDS roles - Windows Server 2016STD
I am currently having an issue installing RDS on a Windows Server 2016STD. This server IS currently a domain controller. I know it's not recommended to run a terminal server on a DC but it is what is required for the situation.
From what I understand Microsoft temporarily disabled the ability to install both RDS and ADDS on a single server, but from the info I can find on Server 2016 this has since been re-allowed.
I am attempting to do a session-based deployment.
When trying to go through the standard deployment method, the installation fails on the RD Connection Broker role service with: "Failed: Unable to install RD Connection Broker role server on server 'Server'".
If trying to install with the Quick Start deployment method, the deployment fails at Remote Desktop Services role services with the error: "Failed: Unable to install the role services. Exception calling "Translate" with "1" argument(s):"Some or all identity references could not be translated."
There don't appear to be any errors or relevant events in the Event Viewer.
Any help will be greatly appreciated!
↧
RDS client cannot see the local printer
we have a problem days ago and we couldn't figure it out
we have one employe works as remot before he was able to see his local printer and use it but now hes not able to see it
i check everything i can GPO ,terminal server mangment, remot desktop settings , easy print , ..... all seems to be right but he still not able to use his local printer
↧
RDS 2012 (not R2) licensing issues. Not showing the correct amount used CALs.
Hello,
I have a 2012 RDS server that is up and functioning with 45 per user CALs, but I'm having some issues with it not showing the correct amount of licenses in use. I've run the licensing diagnostic, it comes back clean.
That said, I have 42 unique user accounts connected and it only shows 17 licenses as in use. Also, some of these 17 licenses show odd dates for issued and expiration. One user has had his license since 12/30/2019 and shows expiration for tomorrow. Should the lease time on these licenses extend out as far as three months?
I've dug through the logs and settings, but can't find anything tangibly wrong even if things look wrong. I must be missing something, but I've no idea what. Any thoughts or guidance is appreciated.
↧
↧
Add-in is available, but not loaded. The managed add-in loader failed to initialize for MS Office Prof Plus 2016 on Windows 2019 Server Standard
Hi,
I need help. I have a third party add-in and I have installed on Windows 2019 Server Standard with change user /install on cmd. I even have Office Shared Features and Office Tools installed. The third party add-in shows up on the add-in list, but not on the toolbar and it's not listed under the Active Application Add-ins under Add-ins, but it's showed in the Inactive Application Add-ins. I also try to select COM, under Manage, and I can see the third party add-in, but when click OK, it stills won't show up on the toolbar.
Does anyone encounter anything like this? Please help!
I need help. I have a third party add-in and I have installed on Windows 2019 Server Standard with change user /install on cmd. I even have Office Shared Features and Office Tools installed. The third party add-in shows up on the add-in list, but not on the toolbar and it's not listed under the Active Application Add-ins under Add-ins, but it's showed in the Inactive Application Add-ins. I also try to select COM, under Manage, and I can see the third party add-in, but when click OK, it stills won't show up on the toolbar.
Does anyone encounter anything like this? Please help!
TB
↧
RDS Best Practise (2019)
Dear All,
We would like find out below if best design of RDS architecture:
DMZ
1 Machine would host the Remote Desktop Gateway and the Remote Web Access
Internal
1 Machine would host the Remote Connection Broker and RD Licensing
2 Machine with the Remote Session host
With above setup, could you help to clarify below question:
1) What is the network port requirement for this setup?
2) Should RDG&RWS join to domain?
3) What Internal cert required for connection?
Thank you in advanced.
↧
Event ID 50 & 56
Dear All,
I'm Receiving above error in Event Logs in every 1-2 Hrs,
I have tried all like below settings.
1. Offload Receive IP Checksum
2. Offload Receive TCP Checksum
3. Offload TCP Segmentation
4. Offload Transmit IP Checksum
5. Offload Transmit TCP Checksum
6. IPV4 Checksum Offload
7. Large Send Offload v2 (IPV4)
8. Large Send Offload v2 (IPV6)
9. Receive-Side Scaling
10. TCP Checksum Offload (IPV4)
11. TCP Checksum Offload (IPV6)
12. UDP Checksum Offload (IPV4)
13. UDP Checksum Offload (IPV6)
Disabling Chimney / RSS
Netdma Disabled through registry,.. but still im receiving Event : 50 errors.
If any one having solution, please let me know. Thanks in Advance.
Regards
Ashfak
↧
RDP connection not working with UPN in Credential Manager
Hi all,
We are instructing users of RemoteApps to add credentials to Credential Manager in windows 7 so they don't have to type username/password everytime they want to use an application.
This works with the following settings:
URL: TERMSRV/rdsfarm.domain.local
Username: domain.local\username
Password: [password]
However, it will not work with a UPN like this:
URL: TERMSRV/rdsfarm.domain.local
Username: username@userdomain.com
Password: [password]
We simply receive the error when the RemoteApp starts up:
"The specified user name does not exist. Verify the username and try logging in again. If the problem continues, contact your system administrator or technical support".
The UPN works when typing in manually when prompted (without saved credentials).
- Users connect through a NLB gateway, FC brokers and to a NLB RDS farm.
- Tested with most updated RDC client from Microsoft website.
- All servers are up to date with latest patches on Windows Server 2008 R2.
Please advise,
James
↧
↧
upgrade OS on connection broker
Hi guys,
i have 2 connection broker server with 2012 R2 configured on ha mode. So i need to upgrade this server to 2019 because i will need to use 2019 as host server.
i have saw this document
but it's not clear, i need remove the server from HA group, upgrade OS, after upgrade the second server without remove the HA group and finally add the first server to HA group again? it's the correct procedure?
thanks
Andrea
↧
How to allow Terminal Server logon scripts to use PowerShell full language mode?
Hello everybody,
At a customer's site there is a PowerShell logon script set for users via GPO. The users log on to Terminal (RDP) Servers. PowerShell seems to be in restricted language mode at least for normal users. However, the logon script must use features not available in PowerShell restricted language mode.
How can we have the logon scripts in full language mode please?
Best Regards, Stefan Falk
↧
Remote Desktop Services ( Terminal Services) change domain controller
Hi,
I have got the following scenario and would like to change the domain controller on the Remote Desktop Session host server.
1.
Domain Name - xyz.local
SVR01 ( It is remote desktop session host and license server )
2.
Domain Name - abc.local
Requirement
I would like to move users, groups, GPO from xyl.local to abc.local domain without losing the user profiles settings and apps configuration in SVRRDSH01.
I will be decommissioning the domain xyl.local.
What would be the best method to complete the migration?
↧
Remote Desktop Services - Server Authentication Certificate problem
Hello
We have got a server, call it S1, running Windows Server 2012, and workstations running Windows 10 Enterprise 1909. People regularly need to access this server using the workstations. When people on workstations try to access this server, it initially works (i.e. they enter their credentials and then the "The identity of the remote computer cannot be verified ..." windowappears), but then the "remote desktop can't connect to the remote computer for one of these reasons" error comes up. It goes away when connecting again, but instead shows the following error (without the "The identity of the remote computer cannot be verified ..." screen):
The connection has been terminated because an unexpected server authentication certificate was received from the remote computer. Try connecting again. If the problem continues, contact the owner of the remote computer or your network administrator.
This has been occurring sporadically ever since the server was built, however in the past few days it has appeared on all of the workstations. A few workstations used by sysadmins can still access the server by remotely connecting to another server that is on the same network, then remoting to S1 on the other server, however this is not the case for the rest of the workstations in the room. I've tried pinging S1 and it's replying fine.
I have also checked out the following other solutions to this problem from similar forum posts :
- Replacing mstsc.exe and mstscax.dll - no computers on the network are running W10 build 1511, so can't get the files
- Registry - the only registry options in HKEY_CURRENT_USER\Software\Microsoft\Terminal Server Client are (Default) and PinConnectionBar - no RDGClientTransport
- "Connect and don't warn me" - option is greyed out, stuck on "warn me"
- Services - both the Remote Desktop Services and Remote Desktop Services UserMode Port Redirector are up and running.
I can't seem to figure out anything else about why this is happening.
↧
↧
Query Logged In Users of remote RDS Servers
Hi All
A bit of a strange one. This function has worked in the past, but seems to have stopped. Server 2016 Datacenter. RDS servers set up in a farm, RDS1, RDS2, RDS3 and RDS4. I am able to log on to RDS1, and run the following command:
Query User /Server:RDS2
And I can get a list of all users logged on to the remote server. However, when I try to run the command asking about RDS4, I get the following result:
Error 0x000006BA enumerating sessionnames
Error [1722]:The RPC server is unavailable
I am able to log in to RDS4 and run query user, and it shows me the list of logged in users just fine. I am able to query the other servers from RDS4 successfully. The error seems to happen only when querying RDS4 from 1, 2 or 3. I have tried running the command with the NETBIOS name, as well as the IP and the FQDN. Still get the same result. I have disabled the firewall and AV (Symantec) and still fails. Tried disabling all the third party services and rebooting, but still fails. Tried running sfc /scannow and dism /online /cleanup-image /restorehealth. Both ran through fine and didn't say they fixed anything, but rebooted anyway and still failing. Looking online, there are a lot of references to a certain registry key that needs to be enabled:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\AllowRemoteRPC
This key is set to 1, and has been rebooted. I am logged in as domain admin on all endpoints. The servers will have been created from a single image that was sysprepped, so is it possible that there is a old NETBIOS name somewhere in the registry? Starting to run low on things that I can try to find out what is happening, so Im hoping that someone here has seen this before or has an idea on something we can try.
Thank you for looking, and for your help.
James
↧
RDS device CAL for many users but working simultaneously
Hi,
According to licensing policy of RDS device CAL, this license is granting permission for any users working from one device having valid RDS device CAL.
I understand that purpose of this license is mostly dedicated for users working in shift work, but I am wondering if I could use this license for users working simultaneously, at the same time, from this one device.
Above scenario obviously could be possible to solve by additional software application, but this is why I am asking if this is legal and not violating RDS license terms.
Regards,
Robert
↧
Jan 2020 Windows Updates KB4534297 & KB4534309 Break Mac Remote Desktop connections through Web Application Proxy
In a 2012 R2 RDS environment where Web Application Proxy and RD Gateway are used we found thatMac RDP clients could not open RemoteApps after installing the January 2020 Windows Updates KB4534297 & KB4534309.
Mac users were getting errors 0x204 or 0x3000008 when attempting to connect.
Windows RDP clients could connect fine. The main issue was with the previously mentioned updates on the Web Application Proxy server. Uninstalling these updates from the Web Application Proxy server and rebooting allowed Mac connections to again work through
Web Application Proxy.
↧
Connection using/not using RemoteFX
Trying to get a handle on how/when RemoteFX is used for a remoteapp. I have two RDSH hosts and when launching a simple app from RDweb, every time it hits the SH01 it shows in the RDPCoreTS logs that it is NOT using the advanced RemoteFX RemoteApp Graphics.
Whenever the app hits the SH02 server is shows that it IS using it.
All servers are 2016 and Virtual. Nothing set via GPO for remoteFX, so I was just hoping to understand why this behavior occurs? Is the connection dynamic and will use it under certain favorable network connections or maybe i missed a setting somewhere
that is forcing my scenario? Hard to find specific literature on this.
Appreciate it.
↧
↧
RDS 2016 Standard / RemoteApps Flickering & Disappearing
I'm trying to get our users off of a Citrix solution, in favor of RDS running on Windows Server 2016 Standard.
The only problem is many users who are testing the new solution report that the published RemoteApps flicker or straight up disappear from view. The quick fix is selecting the task tray icon and selecting the running application so that the window re-appears, but I'm wondering if there is a way to fix this entirely. I've read similar stories relating to RDS 2012 and previous versions.
One example of when this happens is when someone is in a published application, and they attempt to save/export a file to PDF (which uses folder redirection), sometimes after they save the file and it successfully exports, the whole remoteapp will vanish from view.
We are using a session based deployment.
We have users with MacOS and Windows 10 and the issue of RemoteApp flickering/disappearing-off-screen occurs on both platforms.
Any help is appreciated.
-rsysAdmin01
↧
not been granted the requested logon type - Status 0xc000015b
After several YEARS of operation, i got a Ticket of an user error: user is complaining tjhat he can see the RDweb icons, but when try to access any published App, the error message:
"To log on to this computer, you must be granted the Allow log on through the Terminal (or Remote Desktop) Services right...."
IN the EV logs:
Failure Information:Failure Reason:The user has not been granted the requested logon type at this machine.
Status: 0xc000015b
Sub Status: 0x0
The TSWeb is up and running for several years, Win2008R2, installed and barely touched since 2012!
So:
1) There are several published applications, among them, a "Chrome Browser" associated to a global group GG-TS-Chrome, and the GG-TS-Chrome is inside the local "Remote Desktop Users" as usual. Te user can see all icons on TSWeb, so, it proves that the user is being considered as inside the group and the whoami /groups is expecting as expected, showing the user´s groups
2) There is NO Deny Logon via TS local or domain policy in place
3) The checkbox denying logon via TS in user´s AD properties (RDS profile) is NOT checked
4) The AD group GG-TS-Chrome is isnde the "Remote Desktop Users" of the local TS/RDweb server
5) RDP properties are OK, permissions for Guest/users are in palce, as expected
what else should I check?
↧
Internal Web App Resolution
Hi,
We have a web application published on rdweb through internet explorer. When users click on the application, it opens in internet explorer and the screen resolution is fine when opened on PCs but very small if Microsoft Surface users open it. We are currently having same application with two different sizes to solve this problem. Is there a way to have one size for all the devices?
Thanks.
↧